2mm 3mm Straight Invar 36 Wire For Electronic Devices

2mm/3mm Electronic Devices Straight Wire Invar 36 Bar Price

This is one of the controlled expansion alloys.It has an expansion rate roughly 10% that of standard carbon steels.Also known as Invar 36

or Alloy 32-6,but this alloy is extremely rare and is generally only produced by the mill in the heat lot quantities.

Note:Recent testing has determined that increased hardness will decrease CTE in all temperature rangs in Invar alloys.

Invar 36 is suitable for the applications who require low coefficient of expansion, such as production, storage and transportation of liquid gas, temperature regulation devices working below 200°C, aperture mask, unit frameworks working below -200°C and so on.

Chemical composition

Specifications

Applications

This alloy has been used fro applicaitons where dimensional changes due to temperature variation must be

minimized such as in radio and electronic devices,aircraft controls,optical and laser system,etc.

Invar 36 alloy has been used in conjunction with high expansion alloys in applicaitons where a motion is desired

when the temperature changes,such as in bimetallic themromostats and in rod and tubes assemblies for temperature

regulators.

Annealing for stress relief

Heated to 530~550℃ and hold 1~2 h Cold down

Anmealing

In order to eliminate hardening ,which can be bring out in cold-rolled ,cold drawing process,Annealing needs heated

to 830~880℃ in vacuum,hold 30min.

The stabilization process

In protective media and heated to 830℃,and hold 20mins ~1h,quench

Due to the stress generated by quenching,heated to 315℃,hold 1~4h.

Precautions

Can not be hardened by heat treatment

Surface treratment can be sandblasting,polishing or pickling

Alloy can be used for 25% hydrochloric acid pickling solution at 70℃ to clear oxidized surface

3mm Invar 36 Wire

2mm Invar 36 Wire

Electronic Devices Invar 36 Material

2mm 3mm Straight Invar 36 Wire For Electronic Devices Images